Lifting Beams, Spreader Beams & Adjustable Lifting/Spreader Beams

◥ Model LBF

Lifting Beams Fixed

Our lifting beam design have single upper lift points that are well-suited to lighter, shorter span lifts that have a limited headroom requirement, such as in smaller manufacturing shops or storage type facilities. Every beam is engineered to be user friendly with the highest standards of safety and durability. The data table below lists the basic standard lifting beam offering.


  • A wide range of sizes, dimensions, capacities and configurations are available upon request.
  • Refer to the Beam Options in our catalog on page 6 for additional accessories and capabilities.
  • Beam profiles vary based on capacities.
  • To design a custom lifting beam design for your project, refer to our Request A Quote page for more.

Model LBF

Model* Capacity (tons) Lengths (L)** (ft) Head Room (HR) (in) Lift Bale*** W x H (in) Weight**** (lbs @ max. L) Renderings
LBF025 1/4 4-6-8-10 8 1.00 x 2.25 30
LBF050 1/2 5-6-8-10-12 10 1.25 x 2.75 90
LBF1 1 5-6-8-10-12 12 1.25 x 2.75 210
LBF2 2 8-10-12-20 14 1.25 x 3.25 480
LBF3 3 8-10-12-20 16 1.50 x 4.00 650
LBF4 4 8-10-12-20 18 2.00 x 4.75 730
LBF5 5 8-10-12-16-20-24 20 2.25 x 4.75 1,250
LBF8 8 8-10-12-16-20-24 22 2.50 x 6.00 1,575
LBF10 10 8-10-12-16-20-24-30 24 2.50 x 6.25 2,625
LBF12 12 8-10-12-16-20-24-30 26 2.75 x 7.00 4,150
LBF15 15 10-12-16-20-24-30 28 2.75 x 7.50 4,775
LBF20 20 10-12-16-20-24-30-40 30 3.50 x 9.00 5,700
LBF25 25 12-16-20-24-30-40 32 3.50 x 12.00 6,800
LBF30 30 12-16-20-24-30-40 34 3.75 x 13.00 7,875
LBF40 40 20-24-30-40 36 4.50 x 15.00 9,800
LBF50 50 20-24-30-40 38 4.75 x 17.00 12,000
LBF75 75 20-24-30-40 40 4.75 x 17.00 15,800
LBF100 100 20-24-30-40 42 6.00 x 18.00 20,300
LBF125 125 20-24-30-40 45 6.50 x 18.50 24,000
* Model Number Code: LB = Style (Lifting Beam), followed by capacity and then length.
** Lengths (L): expressed in a range of standard lengths available.
*** Lift Bale: Lower Bale hole dia. per Crosby Shackle sizes by capacity.
**** Weight: shown for the maximum length (L) in range.
2000 lbs. = 1 Ton. 2205 lbs. = 1 (metric) tonne.

◥ Model SBF

Spreader Beams Fixed

The spreader beam design efficiently distributes the weight of a load between two main points and are effective at capacity loads with large spans where headroom is not limited. They add a measure of stability and are ideal for carrying heavy duty loads. Every beam is engineered to be user friendly with the highest standards of safety and durability. The data table below lists the basic standard, fixed position, spreader beam offering.


  • A wide range of sizes, dimensions, capacities and configurations are available upon request.
  • Refer to the beam options in our catalog on page 6 for additional accessories and capabilities.
  • The actual spread of the lower Lugs will be slightly less than the length of the beam.
  • Designed for a 45˚ Sling Angle. 30˚ to 60˚ available on request.
  • Complies with ASME Standards.
  • Rigging available on request.
  • To request a spreader beam design for your project, refer to our Request A Quote page to more.

Model SBF

Model* Capacity (tons) Lengths (L)** (ft) Head Room (HR) (in) Lift Bales*** (hole dia.) (in.) Weight**** (lbs @ max. L)
SBF025 1/4 4-6-8 57-5/8 0.313 / 0.313 40
SBF050 1/2 4-6-8 57-5/8 0.375 / 0.313 50
SBF1 1 4-6-8-10-12 86-7/16 0.500 / 0.375 65
SBF2 2 4-6-8-10-12 86-7/16 0.750 / 0.500 105
SBF3 3 8-10-12-16-20 144 1.000 / 0.625 300
SBF4 4 8-10-12-16-20 144 1.000 / 0.750 350
SBF5 5 10-12-16-20-24 172-3/4 1.125 / 0.875 425
SBF8 8 10-12-16-20-24-30 216 1.250 / 1.000 500
SBF10 10 12-16-20-24-30 216 1.375 / 1.000 575
SBF12 12 12-16-20-24-30 216 1.500 / 1.125 625
SBF15 15 16-20-24-30-40 288 1.750 / 1.250 950
SBF20 20 16-20-24-30-40 288 2.250 / 1.375 1,200
SBF25 25 16-20-24-30-40 288 2.250 / 1.500 1,250
SBF30 30 16-20-24-30-40 288 2.500 / 1.750 1,325
SBF40 40 16-20-24-30-40 288 3.000 / 2.250 1,400
SBF50 50 16-20-24-30-40 288 3.000 / 2.250 1,500
* Model Number Code: SB = Style (Spreader Beams), followed by capacity and then length.
** Lengths: Shown in a range of standard lengths available.
*** Lift Bales: Lifting holes for “Upper/Lower” sling rigging are based on Crosby® shackle sizes.
**** Weight: Shown is for the maximum length (L) in the range.
2000 lbs. = 1 Ton. 2205 lbs. = 1 (metric) tonne.

Lifting/Spreader Beams Adjustable

◥ Model LBA

Lifting Beams Adjustable

Model LBA-MH

Lifting Beam, Adjustable, Multi-Hole

Model LBA-SB

Lifting Beam, Adjustable, Sliding Bale

◥ Model SBA

Adjustable Spreader Beam

Model SBA-T

Spreader Beam, Adjustable, Telescoping

Model SBA-DT

Spreader Beam, Adjustable, Dual Telescoping

Lifting/Spreader Beams Adjustable

Model LSBA-MH

Lifting/Spreader Beam, Adjustable, Multi-Hole

Model LSBA-MB

Lifting/Spreader Beam, Adjustable, Multi-Bale

For dimensions and other requirements not offered here, please contact our knowledgeable sales team for a quick quote based upon the specific job application.

Produced
in the
United States

We proudly comply with the Presidential Executive Order #13788 and the Federal Trade Commission requirements for the “Produced in the United States” designation.