Lifting & Spreader Beams

◥ Model LBF Lifting Beams Fixed

Our lifting beam design have single upper lift points that are well-suited to lighter, shorter span lifts that have a limited headroom requirement, such as in smaller manufacturing shops or storage type facilities. Every beam is engineered to be user friendly with the highest standards of safety and durability. The data table below lists the basic standard lifting beam offering.

 

  • A wide range of sizes, dimensions, capacities and configurations are available upon request.
  • Refer to the Beam Options in our catalog on page 6 for additional accessories and capabilities.
  • Beam profiles vary based on capacities.
  • To design a custom lifting beam design for your project, refer to our Request A Quote page for more.

Model LBF

Model*Capacity (tons)Lengths (L)** (ft)Head Room (HR) (in)Lift Bale*** W x H (in)Weight**** (lbs @ max. L)Renderings
LBF0251/44-6-8-1081.00 x 2.2530
LBF0501/25-6-8-10-12101.25 x 2.7590 
LBF115-6-8-10-12121.25 x 2.75210 
LBF228-10-12-20141.25 x 3.25480 
LBF338-10-12-20161.50 x 4.00650 
LBF448-10-12-20182.00 x 4.75730 
LBF558-10-12-16-20-24202.25 x 4.751,250 
LBF888-10-12-16-20-24222.50 x 6.001,575 
LBF10108-10-12-16-20-24-30242.50 x 6.252,625 
LBF12128-10-12-16-20-24-30262.75 x 7.004,150 
LBF151510-12-16-20-24-30282.75 x 7.504,775 
LBF202010-12-16-20-24-30-40303.50 x 9.005,700 
LBF252512-16-20-24-30-40323.50 x 12.006,800 
LBF303012-16-20-24-30-40343.75 x 13.007,875 
LBF404020-24-30-40364.50 x 15.009,800 
LBF505020-24-30-40384.75 x 17.0012,000 
LBF757520-24-30-40404.75 x 17.0015,800 
LBF10010020-24-30-40426.00 x 18.0020,300 
LBF12512520-24-30-40456.50 x 18.5024,000 
 
 
* Model Number Code: LB = Style (Lifting Beam), followed by capacity and then length.
** Lengths (L): expressed in a range of standard lengths available.
*** Lift Bale: Lower Bale hole dia. per Crosby Shackle sizes by capacity.
**** Weight: shown for the maximum length (L) in range.
2000 lbs. = 1 Ton. 2205 lbs. = 1 (metric) tonne.

◥ Model SBF Spreader Beams Fixed

The spreader beam design efficiently distributes the weight of a load between two main points and are effective at capacity loads with large spans where headroom is not limited. They add a measure of stability and are ideal for carrying heavy duty loads. Every beam is engineered to be user friendly with the highest standards of safety and durability. The data table below lists the basic standard, fixed position, spreader beam offering.

 

  • A wide range of sizes, dimensions, capacities and configurations are available upon request.
  • Refer to the beam options in our catalog on page 6 for additional accessories and capabilities.
  • The actual spread of the lower Lugs will be slightly less than the length of the beam.
  • Designed for a 45˚ Sling Angle. 30˚ to 60˚ available on request.
  • Complies with ASME Standards.
  • Rigging available on request.
  • To request a spreader beam design for your project, refer to our Request A Quote page to more.

Model SBF

Model*Capacity (tons)Lengths (L)** (ft)Head Room (HR) (in)Lift Bales*** (hole dia.) (in.)Weight**** (lbs @ max. L)
SBF0251/44-6-857-5/80.313 / 0.31340
SBF0501/24-6-857-5/80.375 / 0.31350
SBF114-6-8-10-1286-7/160.500 / 0.37565
SBF224-6-8-10-1286-7/160.750 / 0.500105
SBF338-10-12-16-201441.000 / 0.625300
SBF448-10-12-16-201441.000 / 0.750350
SBF5510-12-16-20-24172-3/41.125 / 0.875425
SBF8810-12-16-20-24-302161.250 / 1.000500
SBF101012-16-20-24-302161.375 / 1.000575
SBF121212-16-20-24-302161.500 / 1.125625
SBF151516-20-24-30-402881.750 / 1.250950
SBF202016-20-24-30-402882.250 / 1.3751,200
SBF252516-20-24-30-402882.250 / 1.5001,250
SBF303016-20-24-30-402882.500 / 1.7501,325
SBF404016-20-24-30-402883.000 / 2.2501,400
SBF505016-20-24-30-402883.000 / 2.2501,500
 
 
* Model Number Code: SB = Style (Spreader Beams), followed by capacity and then length.
** Lengths: Shown in a range of standard lengths available.
*** Lift Bales: Lifting holes for “Upper/Lower” sling rigging are based on Crosby® shackle sizes.
**** Weight: Shown is for the maximum length (L) in the range.
2000 lbs. = 1 Ton. 2205 lbs. = 1 (metric) tonne.